Have you ever bought Onn Wireless Earbuds, only to find that they’re not charging? If so, you’re not alone! There are plenty of complaints online about getting Onn wireless earbuds to trust and a few tricks you can try to make them work again.
Is the Charge Light Flashing Orange or Red?
If the charge light is flashing orange, the Onn wireless earbud is low on battery and needs to be charged. If the charge light flashes red, the Onn wireless earbud is entirely dead and will not turn on, no matter what. For the charge light to turn off, the Onn wireless earbud should be plugged in with a charger for at least 20 minutes. Once the charge light turns off, unplug the charging cord from your device and plug it back in.
Power Cycle Your Device
Power cycling your Onn Wireless earbuds is a quick and easy fix if you are having trouble charging them.
- Remove the battery from the bottom of the earbud.
- Plug in your charger.
- Put the battery back into its slot on the bottom of the earbud.
- After about 20 minutes, check if it is fully charged by taking it out and turning it on for 3 seconds to see if you hear any sound.
- If this does not work, try plugging your charger into an outlet near where you will be using the earbuds while they charge.
- When plugged in, your device should show 100% power in 10 hours.
Check the Charger Cable
If you’re experiencing an issue with your Onn wireless earbuds not charging. Sometimes the wires inside can break down, which will prevent a charge. You can also try plugging in your charger cable to your computer or phone to see if it charges, as this is a possible sign of a broken wire. However, if your lines are working and the earbuds still won’t charge, there’s likely something wrong with the battery. It may be time for a replacement!
Change Out the Ear Buds
The Onn wireless earbuds have a short battery life of 2 hours and come with an extra set of earbuds. The battery life can be extended by changing out the earbuds. The new earbuds will last for about 3 hours, but this also depends on how often you use them and your hearing volume preferences. It would be best if you used these new earbuds to give old ones time to charge, so they are always at total capacity.
Fully Discharge and Then Charge Again
Sometimes, the battery in your wireless earphones might need to be fully discharged and recharged. To do this, turn off the earphones and remove the battery. Once you have done that, could you wait 10 seconds and put it back in? After this, leave them off for at least 30 minutes before turning them on again. If they still don’t charge after that, they may be wrong, and you should contact customer support for a replacement.
Reset All Settings
If your Onn wireless earbuds do not charge, you can do a few things to resolve the issue. First, you should try resetting the device by holding the power button for 15 seconds and then disconnecting it from any Bluetooth devices in range. If that does not work, try turning off Bluetooth on your phone or tablet and reconnecting with the Onn device.
You may also want to ensure the battery is fully charged before using it again. To do this, turn the power button on while charging until the light blinks green. Once this is done, wait 5 minutes and turn the power button off while continuing to charge for an hour more.
Has Your Device been Checked by an Expert?
Many things can cause the battery to stop working correctly, such as water damage, physical damage to the battery itself, defective charger or receiver unit wiring, and more. Letting your battery power run down all the way could also result in losing control after the initial charge. When these symptoms occur, it is best to have them checked out immediately before any problems get worse.
Conclusion
There are a few ways to troubleshoot the Onn Wireless Earbuds. The first step should be to make sure the battery is charged. If it is not, plug in the charging cable and let it charge for at least an hour before trying again. It may be time to buy a new earbud set if it still does not work. In some cases, there could be a hardware issue with the device itself, and replacements will need to be sent out by the manufacturer.
I hope this blog post was helpful. If you have any questions, please leave a comment below. Thanks for reading!
Related Posts:
