If your Beats Solo 3 won’t turn on, you might be able to solve the issue using some troubleshooting steps that are incredibly easy to implement. These steps will get your Beats Solo 3 turned back on within minutes and allow you to listen to music again without worrying about it turning off.
Why did My Beats Solo 3 Headphones Stop Turning on?
One of the most common reasons why Beats Solo 3 headphones stop turning on is because their battery is dead. Be sure to charge your headphones for at least 30 minutes before you turn them back on. If the battery still doesn’t turn on, you may need to replace the battery.
If your headphones still won’t turn on after charging and replacing the battery, there may be a problem with the wire or built-in circuit board.
Is it Possible to Fix them?
The Beats Solo 3 won’t turn on if the battery is drained, so it’s best to charge them before they die. If they’re set, then there’s a chance that you may have inserted the USB cord incorrectly into the device. If this is the case, try plugging in your Beats Solo 3 headphones again with a different USB cord. You can also try changing the battery with a new one if you have an extra one lying around.
Which Components are Required for Fixing these Headphones?
There may be a problem with the battery not being charged. Plug in the Beats Solo 3 headphones to a power source and allow them to set for an hour before trying again. It is also possible that the Beats Solo 3 headphones are not being turned on due to an issue with the power button. Hold the power button for more than 10 seconds, then release and try turning them back on again.
The first step in this guide – disassembling your headphones
The first step in this guide is to disassemble your headphones. Firstly, remove the headband from the ear cups. To do this, you’ll need to pry the two ear cups with a flathead screwdriver carefully. Next, use the same flathead screwdriver to carefully pry open the metal housing enclosing the charging port and switch cover. Be careful not to apply too much pressure as these parts are fragile.
The second step in this guide – replacing buttons and headphone jack
The second step in this guide is to replace the buttons and headphone jack. Remove the bottom panel of the Beats Solo 3 with a Phillips screwdriver, starting at the bottom left corner. On the left side, unscrew and remove the screws with a Phillips screwdriver. After unscrewing all of the screws, pull off the bottom panel of the Beats Solo 3. Locate the button board that needs replacing and use your Phillips screwdriver to loosen the four screws holding it down.
The third step in this guide is reconnecting wires and putting everything back together.
When you have everything back together, try to turn your Beats Solo 3 on again. If it still doesn’t work, check the battery by putting it into a different device and seeing if that device has any power. If no juice is left in the storm, get a new one here. You can also plug your Beats Solo 3 into a USB port with a cord for some emergency charging until you can replace the battery. Finally, for now, at least, make sure not to let this happen again – put all the cables in their proper place after use, so they don’t go missing!
Now, let’s fix the main board of your Headphones
If the Beats Solo 3 won’t turn on, there may be a problem with the main board. The main board is in charge of turning the headphones on and off, so if it is broken or malfunctioning, that could be why your headphones won’t turn on. Unfortunately, these issues are hard to fix without separating the whole unit. Luckily, this guide should help you get your headphones back up and running.
And finally – how do I know if it worked?
The Beats Solo 3 Won’t Turn on? Fear not. You can take a few steps to ensure that your headphones aren’t broken. First, try plugging them into a different device, like a phone or computer. If they work when plugged into another machine, the issue might be with your laptop or tablet, not the headphones. If that doesn’t work, you’ll want to try charging the headphones before troubleshooting more complicated issues like resetting the Bluetooth settings.
The Beats Solo 3 headphones are sleek and comfortable but are not designed to last. If your headphones don’t turn on, you may need to replace the battery. If this doesn’t work, you might need to replace the power cord. There is no exact way for you to diagnose Beats Solo 3 troubleshooting without first replacing a component or two, just like any computer troubleshooting exercise would require.